BJR
HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
This Article
Right arrow Full Text (PDF)
Services
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Right arrow reprints & permissions
Citing Articles
Right arrow Citing Articles via HighWire
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Meyer, J.
Right arrow Articles by Mills, J. A.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Meyer, J.
Right arrow Articles by Mills, J. A.

The British Journal of Radiology, Vol 70, Issue 830 201-206, Copyright © 1997 by British Institute of Radiology

ARTICLES

Demonstration of a combined filter to improve the field uniformity of a 90 kV superficial X-ray therapy machine for different treatment field sizes

J Meyer and JA Mills
Coventry University, School of Natural and Environmental Sciences, UK.

The field uniformity of a superficial X-ray machine operating at 90 kV, 10 mA and filtered with a 1.1 mm aluminium beam hardening filter was investigated at a depth of 1 cm below the surface. Uniformity measurements were carried out using films and a densitometer to detect the relative absorbed dose across the field. Film dosimetry was assessed by comparison with ionization chamber dosimetry in a water tank. The original flat hardening aluminium filter was replaced by a combined, profiled filter to improve the uniformity across field sizes 20 cm, 5 cm and 2 cm diameter as well as hardening the beam. Flatness of the beam profile was improved for the 20 cm field size from +/-7.5% to +/-1.3% across the anode/cathode direction and from +/-7.9% to +/-4.7% in the anode/cathode direction. For the 5 cm field size the improvement was from +/-4% to +/-3% and from +/-5.3% to +/-3.6% and for 2 cm field size from +/-3.4% to +/-2.8% and from 10.5% to +/-9.7% in the same directions, respectively. Beam quality measurements were made and the original half-value-layer was reduced from 2.21 +/- 0.09 mm to 2.07 +/- 0.09 mm. The project demonstrated that it was possible to build a filter capable of flattening the beam profile for different sized applicators without significantly changing the penetrating ability of the beam.


This article has been cited by other articles:


Home page
 Transactions of the Institute of Measurement and ControlHome page
J. Meyer, K. J. Burnham, O. C.L. Haas, J. A. Mills, and E. M. Parvin
Application of a least-squares parameter estimation approach for 2-D spatial modelling of compensators for intensity-modulated radiotherapy
Transactions of the Institute of Measurement and Control, December 1, 2002; 24(5): 369 - 386.
[Abstract] [PDF]

Home page
 Br. J. Radiol.Home page
P A Evans, A J Moloney, and P J Mountford
Performance assessment of the Gulmay D3300 kilovoltage X-ray therapy unit
Br. J. Radiol., June 1, 2001; 74(882): 537 - 547.
[Abstract] [Full Text] [PDF]


HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
BJR DMFR IMAGING  ALL BIR JOURNALS 
Copyright © 1997 by the British Institute of Radiology.