BJR
HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
British Journal of Radiology (1975) 48, 851-857
© 1975 British Institute of Radiology
doi:
Services
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Right arrow reprints & permissions
Citing Articles
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Gifford, D.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Gifford, D.

The British Journal of Radiology, Vol 48, Issue 574 851-857, Copyright © 1975 by British Institute of Radiology

ARTICLES

A new design policy for protective barriers in departments of x-ray diagnosis

D Gifford

In order to calculate the thicknesses of protective barriers requried in departments of radiodiagnosis for walls, floors, ceilings, protective screens, etc., it is necessary to make an assessment of work load and occupancy factor in each direction. In order to ensure that barriers are safe, it is customary to assume that all the radiological procedures are carried out at the greatest kVp value used in the room in question, and to look up the necessary thicknesses from prepared tables. In fact, only a small fraction of work load is carried out at the highest kilovoltage, and also it is found that a considerable fraction of the total work load is directed downwards. A computer program has been written to use data available from comprehensive analyses of work load broken down into suitable kVp intervals. As the cost of providing the necessary protective barriers can be anything from a few hundred pounds to several thousand pounds, the use of exact values for work load separated into kVp ranges for each direction can lead to substantial savings in cost amounting to hundreds of pounds per room whilst still satisfying the requirements of the Code of Practice for the Protection of Persons against Ionizing Radiations arising from Medical and Dental Use (HMSO, 1972). Departmental surveys were carried out to establish the distribution of work load in kVp and direction, and also to ascertain dosage levels to the staff and within existing rooms. The results show that in practice the doses are such that the reduced barriers found by the method described would be entirely satisfactory.




HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
BJR DMFR IMAGING  ALL BIR JOURNALS 
Copyright © 1975 by the British Institute of Radiology.